(kicad_pcb (version 20240108) (generator "iemi_dampone_board") (generator_version "1")
  (general (thickness 1.6) (legacy_teardrops no))
  (paper "A3")
  (title_block (title "DampOne grille board rev A") (date "2026-11-03") (rev "A") (company "IEMI Labs") (comment 1 "One square ring board 194 x 194 in the grille rim, side A to the room, side B to the ceiling; wall-camera tab on a 4 mm flex"))
  (layers (0 "F.Cu" signal) (1 "In1.Cu" signal) (2 "In2.Cu" signal) (31 "B.Cu" signal) (32 "B.Adhes" user "B.Adhesive") (33 "F.Adhes" user "F.Adhesive") (34 "B.Paste" user) (35 "F.Paste" user)
    (36 "B.SilkS" user "B.Silkscreen") (37 "F.SilkS" user "F.Silkscreen") (38 "B.Mask" user) (39 "F.Mask" user) (40 "Dwgs.User" user "User.Drawings")
    (41 "Cmts.User" user "User.Comments") (44 "Edge.Cuts" user) (45 "Margin" user) (46 "B.CrtYd" user "B.Courtyard") (47 "F.CrtYd" user "F.Courtyard")
    (48 "B.Fab" user) (49 "F.Fab" user))
  (setup (pad_to_mask_clearance 0))
  (net 0 "")
  (gr_poly (pts (xy -97 97) (xy 97 97) (xy 97 -97) (xy -97 -97) (xy -97 -8) (xy -82.8 -8) (xy -82.8 -6) (xy -86.8 -6) (xy -86.8 -7) (xy -98.8 -7) (xy -98.8 7) (xy -86.8 7) (xy -86.8 6) (xy -82.8 6) (xy -82.8 8) (xy -97 8)) (stroke (width 0.1) (type solid)) (fill none) (layer "Edge.Cuts"))
  (gr_poly (pts (xy -59 59) (xy -59 -59) (xy 59 -59) (xy 59 59)) (stroke (width 0.1) (type solid)) (fill none) (layer "Edge.Cuts"))
  (gr_poly (pts (xy 28 -94) (xy 28 -82) (xy 52 -82) (xy 52 -94) (xy 51 -94) (xy 51 -83) (xy 29 -83) (xy 29 -94)) (stroke (width 0.1) (type solid)) (fill none) (layer "Edge.Cuts"))
  (gr_rect (start -86.8 -6) (end -82.8 6) (stroke (width 0.1) (type dash)) (fill none) (layer "Cmts.User"))
  (gr_text "flex, 2 layers: folds 60 deg up" (at -84.8 -10 0) (layer "Cmts.User") (effects (font (size 1 1) (thickness 0.15))))
  (footprint "U1_18x25.5" (layer "B.Cu") (at -78 83.95)
    (property "Reference" "U1" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Espressif ESP32-S3-WROOM-1-N8R8: ESP32-S3, 8 MB flash, 8 MB PSRAM, PCB antenna, FCC/CE certified; castellated, soldered" (at 0 13.55 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -9 -12.75) (end 9 12.75) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -9 -12.75) (end 9 12.75) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U2_3x2" (layer "B.Cu") (at 77 70)
    (property "Reference" "U2" (at 0 0 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Microchip ATECC608B, UDFN-8: signs every call" (at 0 1.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -1.5 -1) (end 1.5 1) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -1.5 -1) (end 1.5 1) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U9_2x3" (layer "B.Cu") (at 82 70)
    (property "Reference" "U9" (at 0 0 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "ID EEPROM 2 kbit (product, board version, serial, calibration)" (at 0 2.3 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -1 -1.5) (end 1 1.5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -1 -1.5) (end 1 1.5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "J1_13x10" (layer "B.Cu") (at 70 85)
    (property "Reference" "J1" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Molex Micro-Fit 3.0 single-row vertical header, 4 circuits, latched (5 V, ground, fan PWM, fan tach), lead down from the housing through a grommet in the fascia top" (at 0 5.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -6.5 -5) (end 6.5 5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -6.5 -5) (end 6.5 5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U4_10x8" (layer "B.Cu") (at 50 78)
    (property "Reference" "U4" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "5 V input: polyfuse, TVS, reverse block, TI TPS62A02 3.3 V buck" (at 0 4.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -5 -4) (end 5 4) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -5 -4) (end 5 4) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U5_6x4" (layer "B.Cu") (at 35 82)
    (property "Reference" "U5" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Fan PWM output (open drain, 25 kHz) and tach input with filter" (at 0 2.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -3 -2) (end 3 2) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -3 -2) (end 3 2) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "TP1_10x6" (layer "B.Cu") (at -60 72)
    (property "Reference" "TP1" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Factory pads: USB (ESP32-S3 native), serial, boot, enable, rails, current sense" (at 0 3.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -5 -3) (end 5 3) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -5 -3) (end 5 3) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "J2_14x15" (layer "B.Cu") (at 80 -30)
    (property "Reference" "J2" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "microSD socket with a hinged, latched lid (Amphenol 101-00660 class), fitted on every board: our software starts from the card (ESP32-S3 SD bus; the loader the maker flashes reads our program from it)" (at 0 8.3 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -7 -7.5) (end 7 7.5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -7 -7.5) (end 7 7.5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U90_2x2" (layer "B.Cu") (at 89 -30)
    (property "Reference" "U90" (at 0 0 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "microSD card power switch (TPS22917-class load switch, 3.3 V, driven by the card power-enable pin) with a 10 kΩ discharge resistor: a stuck card can be power-cycled" (at 0 1.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -1 -1) (end 1 1) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -1 -1) (end 1 1) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U91_3x1.35" (layer "B.Cu") (at 71 -30)
    (property "Reference" "U91" (at 0 0 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "microSD ESD and filter array, 6 lines (TPD6F003-class), with 22 Ω series resistors on CLK, CMD and D0–D3 and the card-detect line" (at 0 1.475 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -1.5 -0.675) (end 1.5 0.675) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -1.5 -0.675) (end 1.5 0.675) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "SW1_12.8x5.8" (layer "B.Cu") (at -77 -77)
    (property "Reference" "SW1" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Omron D2F-01, pressed through the Ø4 hole in the top by a printed plunger on the ceiling side" (at 0 3.7 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -6.4 -2.9) (end 6.4 2.9) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -6.4 -2.9) (end 6.4 2.9) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U10_1.5x1.5" (layer "B.Cu") (at 40 -95.5)
    (property "Reference" "U10" (at 0 0 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Sensirion SHT45 humidity and temperature, DFN 1.5 × 1.5, on the slotted tongue at the side vents" (at 0 1.55 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -0.75 -0.75) (end 0.75 0.75) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -0.75 -0.75) (end 0.75 0.75) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "MK1_4x3" (layer "B.Cu") (at -25 -78)
    (property "Reference" "MK1" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Infineon IM69D130 MEMS mic, bottom port over a Ø1 hole through the board (running water, drips, the washer)" (at 0 2.3 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2 -1.5) (end 2 1.5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -2 -1.5) (end 2 1.5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "ANT_18x7" (layer "F.Cu") (at -78 93.2)
    (property "Reference" "ANT" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "Keep-out under the ESP32-S3 antenna: no copper, no parts" (at 0 4.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -9 -3.5) (end 9 3.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -9 -3.5) (end 9 3.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U20_9.4x9.4" (layer "F.Cu") (at 78 0)
    (property "Reference" "U20" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "Melexis MLX90640ESF-BAA 32 × 24 thermal sensor, 110 × 75° lens, TO39 can, looking straight down through the floor window" (at 0 5.5 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -4.7 -4.7) (end 4.7 4.7) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -4.7 -4.7) (end 4.7 4.7) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U21_9.4x9.4" (layer "F.Cu") (at -92.8 0)
    (property "Reference" "U21" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "Melexis MLX90640ESF-BAA 32 × 24 thermal sensor, 110 × 75° lens, TO39 can, on the folded tab facing the outside wall" (at 0 5.5 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -4.7 -4.7) (end 4.7 4.7) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -4.7 -4.7) (end 4.7 4.7) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "RKO_14x14" (layer "F.Cu") (at -25 78)
    (property "Reference" "RKO" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "Keep-out in front of the radar antennas: no parts or copper pour" (at 0 7.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -7 -7) (end 7 7) (stroke (width 0.05) (type solid)) (fill none) (layer "Dwgs.User"))
    (fp_rect (start -7 -7) (end 7 7) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U3_6.5x5" (layer "F.Cu") (at -25 78)
    (property "Reference" "U3" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "Infineon BGT60TR13C 60 GHz radar, antennas in package (1 TX, 3 RX): someone in the room, even still in the bath" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -3.25 -2.5) (end 3.25 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -3.25 -2.5) (end 3.25 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "GK1_5x5" (layer "F.Cu") (at -25 -78)
    (property "Reference" "GK1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "Silicone sound gasket Ø5 × 8 from the board hole to the mic port" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "Dwgs.User"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "LS1_12x12" (layer "F.Cu") (at 77 -77)
    (property "Reference" "LS1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "Magnetic sounder 12 × 12 SMD under the tone holes" (at 0 6.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -6 -6) (end 6 6) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -6 -6) (end 6 6) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "Q1_3x3" (layer "F.Cu") (at 77 -66)
    (property "Reference" "Q1" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "Sounder driver FET" (at 0 2.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -1.5 -1.5) (end 1.5 1.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -1.5 -1.5) (end 1.5 1.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U7_2x2" (layer "F.Cu") (at 0 68)
    (property "Reference" "U7" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "Level shifter for the LED data line (3.3 to 5 V)" (at 0 1.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -1 -1) (end 1 1) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -1 -1) (end 1 1) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D1_5x5" (layer "F.Cu") (at 7.6 78)
    (property "Reference" "D1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), behind the opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D2_5x5" (layer "F.Cu") (at 14 78)
    (property "Reference" "D2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), behind the opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D3_5x5" (layer "F.Cu") (at 20.4 78)
    (property "Reference" "D3" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), behind the opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D4_5x5" (layer "F.Cu") (at 26.8 78)
    (property "Reference" "D4" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), behind the opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D5_5x5" (layer "F.Cu") (at 33.2 78)
    (property "Reference" "D5" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), behind the opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D6_5x5" (layer "F.Cu") (at 39.6 78)
    (property "Reference" "D6" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), behind the opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D7_5x5" (layer "F.Cu") (at 46 78)
    (property "Reference" "D7" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), behind the opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D8_5x5" (layer "F.Cu") (at 52.4 78)
    (property "Reference" "D8" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), behind the opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D9_5x5" (layer "F.Cu") (at 7.6 -78)
    (property "Reference" "D9" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), behind the opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D10_5x5" (layer "F.Cu") (at 14 -78)
    (property "Reference" "D10" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), behind the opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D11_5x5" (layer "F.Cu") (at 20.4 -78)
    (property "Reference" "D11" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), behind the opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D12_5x5" (layer "F.Cu") (at 26.8 -78)
    (property "Reference" "D12" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), behind the opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D13_5x5" (layer "F.Cu") (at 33.2 -78)
    (property "Reference" "D13" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), behind the opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D14_5x5" (layer "F.Cu") (at 39.6 -78)
    (property "Reference" "D14" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), behind the opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D15_5x5" (layer "F.Cu") (at 46 -78)
    (property "Reference" "D15" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), behind the opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D16_5x5" (layer "F.Cu") (at 52.4 -78)
    (property "Reference" "D16" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), behind the opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
)