IEMI Labs - CricketOne stump board, design pack rev A-0, 3 Nov 2026
====================================================================
Start with QUOTE.md: what we ask you to quote (turnkey: schematic, layout, rigid-flex fabrication,
assembly with X-ray, BSP, test, delivered ready to run from our microSD card on battery power).

STATUS: placement stage. The outline, sections and the position of all 46 parts are fixed and checked
(KiCad 10 DRC: 0 violations; fit checked in our stump CAD rev T: no part touches a printed or bought part).
The schematic, footprints and copper routing are part of the requested work.

  QUOTE.md                    the request for quote
  board-review.json           our board design review: every parameter checked (camera, frame rate, battery, heat, shock)
  stump-board.kicad_pcb       KiCad 10 board: rigid-flex outline, sections, every part placed (courtyards at real size)
  stump-board.step            3D model of the bare board
  assembly-side-A.pdf / -B    placement drawings (A faces the camera window and heat bar; B the back)
  placement-both-sides.csv    part positions exported by KiCad (mm, board coordinates)
  stump-board-parts.csv       every part: what it is, section, side, size, height in the stump, source
  gerbers/                    outline, silkscreen, fab and courtyard layers (no copper yet)
  mechanical/                 STL of the middle stump's parts the board fits into (rev T) + the CAD fit report
  drawings/                   the board folded in the stump, close-ups of every section, the unfolded board

Board coordinates: x across (0 = stump centre line), y along the unfolded board; height in the stump = y + 24 mm.
Contact: sales@iemilabs.com
