(kicad_pcb (version 20240108) (generator "iemi_courtone_board") (generator_version "1") (general (thickness 1.6) (legacy_teardrops no)) (paper "A2") (title_block (title "CourtOne backboard boards rev A") (date "2026-11-04") (rev "A") (company "IEMI Labs") (comment 1 "8-layer main board 340 x 32 with the IMX415 top head; 4-layer corner board 48 x 120 with the OV5640 head (x2); rim board; light section (x29); digit board (x2); power board; one set per backboard")) (layers (0 "F.Cu" signal) (1 "In1.Cu" signal) (2 "In2.Cu" signal) (31 "B.Cu" signal) (32 "B.Adhes" user "B.Adhesive") (33 "F.Adhes" user "F.Adhesive") (34 "B.Paste" user) (35 "F.Paste" user) (36 "B.SilkS" user "B.Silkscreen") (37 "F.SilkS" user "F.Silkscreen") (38 "B.Mask" user) (39 "F.Mask" user) (40 "Dwgs.User" user "User.Drawings") (41 "Cmts.User" user "User.Comments") (44 "Edge.Cuts" user) (45 "Margin" user) (46 "B.CrtYd" user "B.Courtyard") (47 "F.CrtYd" user "F.Courtyard") (48 "B.Fab" user) (49 "F.Fab" user)) (setup (pad_to_mask_clearance 0)) (net 0 "") (gr_poly (pts (xy -170 -24) (xy -6 -24) (xy -6 28) (xy 6 28) (xy 6 -24) (xy 170 -24) (xy 170 -56) (xy -170 -56)) (stroke (width 0.1) (type solid)) (fill none) (layer "Edge.Cuts")) (gr_poly (pts (xy 236 210) (xy 284 210) (xy 284 90) (xy 267 90) (xy 267 46) (xy 253 46) (xy 253 90) (xy 236 90)) (stroke (width 0.1) (type solid)) (fill none) (layer "Edge.Cuts")) (gr_poly (pts (xy 335 170) (xy 385 170) (xy 385 130) (xy 335 130)) (stroke (width 0.1) (type solid)) (fill none) (layer "Edge.Cuts")) (gr_poly (pts (xy -120 157) (xy 120 157) (xy 120 143) (xy -120 143)) (stroke (width 0.1) (type solid)) (fill none) (layer "Edge.Cuts")) (gr_poly (pts (xy -160 440) (xy 160 440) (xy 160 280) (xy -160 280)) (stroke (width 0.1) (type solid)) (fill none) (layer "Edge.Cuts")) (gr_poly (pts (xy 225 420) (xy 375 420) (xy 375 300) (xy 225 300)) (stroke (width 0.1) (type solid)) (fill none) (layer "Edge.Cuts")) (gr_text "top head hinge 40 mm, corner head hinge 30 mm; leads: clock 0.6 m, corner 1.16 m, rim 2.05 m" (at 0 -68 0) (layer "Cmts.User") (effects (font (size 1.5 1.5) (thickness 0.2)))) (footprint "U1_14x14" (layer "F.Cu") (at -20 -40 0) (property "Reference" "U1" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Rockchip RV1126B, 3 TOPS NPU, ISP, MIPI CSI-2 to the top camera; heat block up to the top rail's top wall (the aluminium frame is the heat sink)" (at 0 7.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -7 -7) (end 7 7) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -7 -7) (end 7 7) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "HB1_16x16" (layer "F.Cu") (at -20 -40 0) (property "Reference" "HB1" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Copper heat block 16 × 16 with a 1 mm gap pad from the RV1126B to the top rail's top wall" (at 0 8.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -8 -8) (end 8 8) (stroke (width 0.05) (type solid)) (fill none) (layer "Dwgs.User")) (fp_rect (start -8 -8) (end 8 8) (stroke (width 0.12) (type solid)) (fill none) (layer "F.Fab")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U10_10x14.5" (layer "F.Cu") (at 0 -40 0) (property "Reference" "U10" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "LPDDR4X 2 GB (3 s of top-camera video for an unsure call)" (at 0 8.05 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -5 -7.25) (end 5 7.25) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -5 -7.25) (end 5 7.25) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U5_11.5x13" (layer "F.Cu") (at 18 -40 0) (property "Reference" "U5" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "eMMC 5.1 32 GB (shipped empty, so the card always starts first; our loader on the card reads the card first; keeps the signed call log, the replays)" (at 0 7.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -5.75 -6.5) (end 5.75 6.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -5.75 -6.5) (end 5.75 6.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U3_7x7" (layer "F.Cu") (at -45 -40 0) (property "Reference" "U3" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Rockchip RK806 class power chip for the RV1126B rails, from the 5 V lead" (at 0 4.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -3.5 -3.5) (end 3.5 3.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -3.5 -3.5) (end 3.5 3.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "Y1_2.5x2" (layer "F.Cu") (at -36 -30 0) (property "Reference" "Y1" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "24 MHz MEMS oscillator (SiTime SiT8008 class)" (at 0 1.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1.25 -1) (end 1.25 1) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -1.25 -1) (end 1.25 1) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U6_12x12" (layer "F.Cu") (at -60 -44 0) (property "Reference" "U6" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "AMPAK AP6256 Wi-Fi 5 + BT 5 module: the scorer's tablet, the coaches' phones and the other backboard; its chip antenna at the board's back edge, 2 mm from the Ø20 radio window in the back face (rev T)" (at 0 6.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -6 -6) (end 6 6) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -6 -6) (end 6 6) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "Y2_2.5x2" (layer "F.Cu") (at -50 -34 0) (property "Reference" "Y2" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "37.4 MHz MEMS oscillator for the Wi-Fi/BT module (SiTime SiT8008 class)" (at 0 1.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1.25 -1) (end 1.25 1) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -1.25 -1) (end 1.25 1) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "AE1_10x3.2" (layer "F.Cu") (at -60 -53.9 0) (property "Reference" "AE1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Dual-band chip antenna at the board's back edge, facing the radio window" (at 0 2.4 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -5 -1.6) (end 5 1.6) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -5 -1.6) (end 5 1.6) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "ANT1_16x6" (layer "B.Cu") (at -60 -52.7 0) (property "Reference" "ANT1" (at 0 0 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Antenna keep-out on both sides: no copper pour, no parts" (at 0 3.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -8 -3) (end 8 3) (stroke (width 0.05) (type solid)) (fill none) (layer "Dwgs.User")) (fp_rect (start -8 -3) (end 8 3) (stroke (width 0.12) (type solid)) (fill none) (layer "B.Fab")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U2_3x2" (layer "F.Cu") (at 40 -30 0) (property "Reference" "U2" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Microchip ATECC608B, UDFN-8: signs every call (basket, points, shot clock, goaltending), keeps the append-only log key" (at 0 1.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1.5 -1) (end 1.5 1) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -1.5 -1) (end 1.5 1) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U9_2x3" (layer "F.Cu") (at 46 -30 0) (property "Reference" "U9" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "ID EEPROM 2 kbit (product, board version, serial, home or away, calibration)" (at 0 2.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1 -1.5) (end 1 1.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -1 -1.5) (end 1 1.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J1_14x15" (layer "F.Cu") (at 70 -40 0) (property "Reference" "J1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "microSD socket with a hinged, latched lid (Amphenol 101-00660 class), fitted on every board: our software starts from the card; reached under the service cover in the rail's top face" (at 0 8.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -7 -7.5) (end 7 7.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -7 -7.5) (end 7 7.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U91_3x1.35" (layer "F.Cu") (at 70 -31 0) (property "Reference" "U91" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "microSD ESD and filter array, 6 lines (TPD6F003-class), with 22 Ω series resistors on CLK, CMD and D0–D3 and the card-detect line" (at 0 1.475 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1.5 -0.675) (end 1.5 0.675) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -1.5 -0.675) (end 1.5 0.675) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U90_2x2" (layer "F.Cu") (at 70 -49 0) (property "Reference" "U90" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "microSD card power switch (TPS22917-class load switch, 3.3 V, driven by the card power-enable pin) with a 10 kΩ discharge resistor: a stuck card can be power-cycled" (at 0 1.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1 -1) (end 1 1) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -1 -1) (end 1 1) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U7_3x1.5" (layer "F.Cu") (at 92 -40 0) (property "Reference" "U7" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "TI DRV5032FB Hall switch facing up: a Ø10 × 5 magnet on a printed boss under the service cover holds it 13 mm away; opening the cover is logged and signed" (at 0 1.55 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1.5 -0.75) (end 1.5 0.75) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -1.5 -0.75) (end 1.5 0.75) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "BZ1_12x12" (layer "F.Cu") (at 120 -32 0) (property "Reference" "BZ1" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "SMD piezo transducer 12 × 12 × 3 (PUI Audio AT-1220-TT class) under a printed sound tube to the tone holes in the front face" (at 0 6.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -6 -6) (end 6 6) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -6 -6) (end 6 6) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "GK1_12x12" (layer "F.Cu") (at 120 -32 0) (property "Reference" "GK1" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Printed sound tube from the call tone forward to the three tone holes, with a mesh" (at 0 6.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -6 -6) (end 6 6) (stroke (width 0.05) (type solid)) (fill none) (layer "Dwgs.User")) (fp_rect (start -6 -6) (end 6 6) (stroke (width 0.12) (type solid)) (fill none) (layer "F.Fab")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "TKO_30x6" (layer "F.Cu") (at 0 -27.2 0) (property "Reference" "TKO" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Nothing taller than 2 mm on side A under the top camera head and its flex" (at 0 3.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -15 -3) (end 15 3) (stroke (width 0.05) (type solid)) (fill none) (layer "Dwgs.User")) (fp_rect (start -15 -3) (end 15 3) (stroke (width 0.12) (type solid)) (fill none) (layer "F.Fab")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U21_10x4" (layer "F.Cu") (at 24 -28 0) (property "Reference" "U21" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "IMX415 LDOs 2.9 / 1.8 / 1.1 V and its 37.125 MHz MEMS oscillator" (at 0 2.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -5 -2) (end 5 2) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -5 -2) (end 5 2) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "C1_14x14" (layer "B.Cu") (at -20 -40 0) (property "Reference" "C1" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "RV1126B decoupling field (under the chip)" (at 0 7.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -7 -7) (end 7 7) (stroke (width 0.05) (type solid)) (fill none) (layer "Dwgs.User")) (fp_rect (start -7 -7) (end 7 7) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U14_8x3" (layer "B.Cu") (at -60 -46 0) (property "Reference" "U14" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Two TI THVD1450 RS-485 transceivers (one per corner board, 50 Mbps): frames on request and the frame-sync pair" (at 0 2.3 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -4 -1.5) (end 4 1.5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -4 -1.5) (end 4 1.5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U15_3x3" (layer "B.Cu") (at -70 -34 0) (property "Reference" "U15" (at 0 0 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "TI THVD1450 RS-485 transceiver: rim and net hits at 1 kHz" (at 0 2.3 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1.5 -1.5) (end 1.5 1.5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -1.5 -1.5) (end 1.5 1.5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U36_10x4.4" (layer "B.Cu") (at 40 -46 0) (property "Reference" "U36" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Two TI SN74AHCT125 level shifters and line drivers for the five light chains and the clock digits (3.3 to 5 V, 33 Ω series)" (at 0 3 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -5 -2.2) (end 5 2.2) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -5 -2.2) (end 5 2.2) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U42_6x5" (layer "B.Cu") (at 110 -46 0) (property "Reference" "U42" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "TI TPS25947 class eFuse (5 A, reverse block) and TVS on the 5 V from the clock box" (at 0 3.3 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -3 -2.5) (end 3 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -3 -2.5) (end 3 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J2_13x10" (layer "B.Cu") (at 150 -50 0) (property "Reference" "J2" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Molex Micro-Fit 3.0 vertical header, 6 circuits, latched: 5 V and GND (two pins each) and the clock-digit data, through the Ø20 hole in the back face up to the clock box" (at 0 5.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -6.5 -5) (end 6.5 5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -6.5 -5) (end 6.5 5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J3_13x10" (layer "B.Cu") (at -150 -50 0) (property "Reference" "J3" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Molex Micro-Fit 3.0 vertical header, 6 circuits, latched: 5 V, GND, the RS-485 pair and the frame-sync pair" (at 0 5.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -6.5 -5) (end 6.5 5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -6.5 -5) (end 6.5 5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J4_13x10" (layer "B.Cu") (at 128 -50 0) (property "Reference" "J4" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Molex Micro-Fit 3.0 vertical header, 6 circuits, latched" (at 0 5.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -6.5 -5) (end 6.5 5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -6.5 -5) (end 6.5 5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J5_9x10" (layer "B.Cu") (at -130 -50 0) (property "Reference" "J5" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Molex Micro-Fit 3.0 vertical header, 4 circuits, latched: 5 V, GND and the RS-485 pair, down the side rail and out at the bottom rail" (at 0 5.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -4.5 -5) (end 4.5 5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -4.5 -5) (end 4.5 5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J6_6.5x5.75" (layer "B.Cu") (at -105 -52 0) (property "Reference" "J6" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "JST GH SM03B-GHS-TB 3-pin side-entry header, latched (5 V, GND, LED data) for the top red row chain" (at 0 3.675 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -3.25 -2.875) (end 3.25 2.875) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -3.25 -2.875) (end 3.25 2.875) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J7_6.5x5.75" (layer "B.Cu") (at -89 -52 0) (property "Reference" "J7" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "JST GH SM03B-GHS-TB 3-pin side-entry header, latched (5 V, GND, LED data) for the top yellow row chain" (at 0 3.675 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -3.25 -2.875) (end 3.25 2.875) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -3.25 -2.875) (end 3.25 2.875) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J8_6.5x5.75" (layer "B.Cu") (at -73 -52 0) (property "Reference" "J8" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "JST GH SM03B-GHS-TB 3-pin side-entry header, latched (5 V, GND, LED data) for the left side chain" (at 0 3.675 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -3.25 -2.875) (end 3.25 2.875) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -3.25 -2.875) (end 3.25 2.875) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J9_6.5x5.75" (layer "B.Cu") (at 7 -52 0) (property "Reference" "J9" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "JST GH SM03B-GHS-TB 3-pin side-entry header, latched (5 V, GND, LED data) for the bottom chain" (at 0 3.675 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -3.25 -2.875) (end 3.25 2.875) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -3.25 -2.875) (end 3.25 2.875) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J10_6.5x5.75" (layer "B.Cu") (at 23 -52 0) (property "Reference" "J10" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "JST GH SM03B-GHS-TB 3-pin side-entry header, latched (5 V, GND, LED data) for the right side chain" (at 0 3.675 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -3.25 -2.875) (end 3.25 2.875) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -3.25 -2.875) (end 3.25 2.875) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "TP1_12x6" (layer "B.Cu") (at 80 -30 0) (property "Reference" "TP1" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Factory pads: USB (RV1126B), serial console, boot, reset, rails, current sense" (at 0 3.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -6 -3) (end 6 3) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -6 -3) (end 6 3) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U12_10x10" (layer "F.Cu") (at 0 22 0) (property "Reference" "U12" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Sony IMX415 8 MP colour camera chip (C1, 3840 × 2160), 4-lane MIPI to the RV1126B over the head's flex, tilted 51° down: the ring, the key and the arc" (at 0 5.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -5 -5) (end 5 5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -5 -5) (end 5 5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U41_18x25.5" (layer "F.Cu") (at 252 180 0) (property "Reference" "U41" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Espressif ESP32-S3-WROOM-1-N16R8 (8 MB PSRAM): takes the OV5640's JPEG frames and keeps the last 2 s; sends the frames round a shot release when the main board asks. Radio off: inside the aluminium rail the link is the wire" (at 0 13.55 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -9 -12.75) (end 9 12.75) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -9 -12.75) (end 9 12.75) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U43_10x6" (layer "F.Cu") (at 272 195 0) (property "Reference" "U43" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "TI TPS62A02 class 3.3 V buck from the 5 V lead; OV5640 LDOs 2.8 / 1.5 V" (at 0 3.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -5 -3) (end 5 3) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -5 -3) (end 5 3) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U44_3x2" (layer "F.Cu") (at 274 180 0) (property "Reference" "U44" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Microchip ATECC608B: signs each frame it sends, so a swapped frame is caught" (at 0 1.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1.5 -1) (end 1.5 1) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -1.5 -1) (end 1.5 1) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U45_2x3" (layer "F.Cu") (at 274 172 0) (property "Reference" "U45" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "ID EEPROM 2 kbit (left or right, calibration)" (at 0 2.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1 -1.5) (end 1 1.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -1 -1.5) (end 1 1.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "CKO_46x20" (layer "F.Cu") (at 260 101 0) (property "Reference" "CKO" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Nothing taller than 2 mm on side A under the corner head and its flex" (at 0 10.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -23 -10) (end 23 10) (stroke (width 0.05) (type solid)) (fill none) (layer "Dwgs.User")) (fp_rect (start -23 -10) (end 23 10) (stroke (width 0.12) (type solid)) (fill none) (layer "F.Fab")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U42C_8x3" (layer "B.Cu") (at 260 160 0) (property "Reference" "U42C" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Two TI THVD1450: the RS-485 pair (frames on request) and the frame-sync pair from the main board" (at 0 2.3 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -4 -1.5) (end 4 1.5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -4 -1.5) (end 4 1.5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J41_14x15" (layer "B.Cu") (at 260 130 0) (property "Reference" "J41" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "microSD socket with a hinged, latched lid (Amphenol 101-00660 class): the ESP32-S3 loads our program from the card" (at 0 8.3 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -7 -7.5) (end 7 7.5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -7 -7.5) (end 7 7.5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U93_3x1.35" (layer "B.Cu") (at 260 139 0) (property "Reference" "U93" (at 0 0 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "microSD ESD and filter array, 6 lines (TPD6F003-class), with 22 Ω series resistors on CLK, CMD and D0–D3 and the card-detect line" (at 0 1.475 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1.5 -0.675) (end 1.5 0.675) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -1.5 -0.675) (end 1.5 0.675) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U92_2x2" (layer "B.Cu") (at 260 121 0) (property "Reference" "U92" (at 0 0 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "microSD card power switch (TPS22917-class load switch, 3.3 V, driven by the card power-enable pin) with a 10 kΩ discharge resistor: a stuck card can be power-cycled" (at 0 1.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1 -1) (end 1 1) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -1 -1) (end 1 1) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J42_13x10" (layer "B.Cu") (at 260 195 0) (property "Reference" "J42" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Molex Micro-Fit 3.0 vertical header, 6 circuits, latched (5 V, GND, RS-485, frame sync), up the side rail and along the top rail" (at 0 5.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -6.5 -5) (end 6.5 5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -6.5 -5) (end 6.5 5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "TP41_10x6" (layer "B.Cu") (at 260 105 0) (property "Reference" "TP41" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Factory pads: USB (ESP32-S3 native), boot, enable, rails" (at 0 3.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -5 -3) (end 5 3) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -5 -3) (end 5 3) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U46_6x6" (layer "F.Cu") (at 260 53 0) (property "Reference" "U46" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "OmniVision OV5640 5 MP colour camera chip (C1, 2592 × 1944, its own JPEG engine), 8-bit camera port to the ESP32-S3 over the head's flex, turned 30° from the side face to the court and 30° down: the shooter's feet in the corner and at the wing" (at 0 3.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -3 -3) (end 3 3) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -3 -3) (end 3 3) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U51_15.4x20.5" (layer "F.Cu") (at 346 143 0) (property "Reference" "U51" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Espressif ESP32-S3-MINI-1-N8: reads the motion chip at 1 kHz and tells a ring hit from a net brush, a lodged ball and a hanging player. Radio off: the link is the wire" (at 0 11.05 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -7.7 -10.25) (end 7.7 10.25) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -7.7 -10.25) (end 7.7 10.25) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U52_2.5x3" (layer "F.Cu") (at 364 138 0) (property "Reference" "U52" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "ST ISM330DHCX 6-axis motion chip, its board screwed flat to the plate-side wall: feels every rim and net hit through the steel plate" (at 0 2.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1.25 -1.5) (end 1.25 1.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -1.25 -1.5) (end 1.25 1.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U53_3x3" (layer "F.Cu") (at 370 152 0) (property "Reference" "U53" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "TI THVD1450 RS-485 transceiver to the main board" (at 0 2.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1.5 -1.5) (end 1.5 1.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -1.5 -1.5) (end 1.5 1.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U54_6x5" (layer "F.Cu") (at 374 162 0) (property "Reference" "U54" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "TI TPS62A02 class 3.3 V buck from the 5 V lead" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -3 -2.5) (end 3 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -3 -2.5) (end 3 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U55_2x3" (layer "F.Cu") (at 364 145 0) (property "Reference" "U55" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "ID EEPROM 2 kbit" (at 0 2.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1 -1.5) (end 1 1.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -1 -1.5) (end 1 1.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J51_14x15" (layer "F.Cu") (at 346 161.5 0) (property "Reference" "J51" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "microSD socket with a hinged, latched lid (Amphenol 101-00660 class): the ESP32-S3 loads our program from the card; reached by opening the ring box" (at 0 8.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -7 -7.5) (end 7 7.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -7 -7.5) (end 7 7.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U95_3x1.35" (layer "F.Cu") (at 337 161.5 0) (property "Reference" "U95" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "microSD ESD and filter array, 6 lines (TPD6F003-class), with 22 Ω series resistors on CLK, CMD and D0–D3 and the card-detect line" (at 0 1.475 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1.5 -0.675) (end 1.5 0.675) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -1.5 -0.675) (end 1.5 0.675) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "U94_2x2" (layer "F.Cu") (at 355 161.5 0) (property "Reference" "U94" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "microSD card power switch (TPS22917-class load switch, 3.3 V, driven by the card power-enable pin) with a 10 kΩ discharge resistor: a stuck card can be power-cycled" (at 0 1.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1 -1) (end 1 1) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -1 -1) (end 1 1) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J52_9x10" (layer "F.Cu") (at 377 137 0) (property "Reference" "J52" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Molex Micro-Fit 3.0 vertical header, 4 circuits, latched (5 V, GND, RS-485), out of the box top and in at the bottom rail" (at 0 5.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -4.5 -5) (end 4.5 5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -4.5 -5) (end 4.5 5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "TP51_8x5" (layer "F.Cu") (at 362 165 0) (property "Reference" "TP51" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Factory pads: USB (ESP32-S3 native), boot, enable, rails" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -4 -2.5) (end 4 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -4 -2.5) (end 4 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "D1_5x5" (layer "F.Cu") (at -110.5 150 0) (property "Reference" "D1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "RGB LED with driver, 5050 (WS2812B class), facing its 12 mm light slot: red for the end of a period, yellow for the shot clock, and the call colours in club play" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "D2_5x5" (layer "F.Cu") (at -93.5 150 0) (property "Reference" "D2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "RGB LED with driver, 5050 (WS2812B class), facing its 12 mm light slot: red for the end of a period, yellow for the shot clock, and the call colours in club play" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "D3_5x5" (layer "F.Cu") (at -76.5 150 0) (property "Reference" "D3" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "RGB LED with driver, 5050 (WS2812B class), facing its 12 mm light slot: red for the end of a period, yellow for the shot clock, and the call colours in club play" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "D4_5x5" (layer "F.Cu") (at -59.5 150 0) (property "Reference" "D4" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "RGB LED with driver, 5050 (WS2812B class), facing its 12 mm light slot: red for the end of a period, yellow for the shot clock, and the call colours in club play" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "D5_5x5" (layer "F.Cu") (at -42.5 150 0) (property "Reference" "D5" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "RGB LED with driver, 5050 (WS2812B class), facing its 12 mm light slot: red for the end of a period, yellow for the shot clock, and the call colours in club play" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "D6_5x5" (layer "F.Cu") (at -25.5 150 0) (property "Reference" "D6" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "RGB LED with driver, 5050 (WS2812B class), facing its 12 mm light slot: red for the end of a period, yellow for the shot clock, and the call colours in club play" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "D7_5x5" (layer "F.Cu") (at -8.5 150 0) (property "Reference" "D7" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "RGB LED with driver, 5050 (WS2812B class), facing its 12 mm light slot: red for the end of a period, yellow for the shot clock, and the call colours in club play" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "D8_5x5" (layer "F.Cu") (at 8.5 150 0) (property "Reference" "D8" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "RGB LED with driver, 5050 (WS2812B class), facing its 12 mm light slot: red for the end of a period, yellow for the shot clock, and the call colours in club play" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "D9_5x5" (layer "F.Cu") (at 25.5 150 0) (property "Reference" "D9" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "RGB LED with driver, 5050 (WS2812B class), facing its 12 mm light slot: red for the end of a period, yellow for the shot clock, and the call colours in club play" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "D10_5x5" (layer "F.Cu") (at 42.5 150 0) (property "Reference" "D10" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "RGB LED with driver, 5050 (WS2812B class), facing its 12 mm light slot: red for the end of a period, yellow for the shot clock, and the call colours in club play" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "D11_5x5" (layer "F.Cu") (at 59.5 150 0) (property "Reference" "D11" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "RGB LED with driver, 5050 (WS2812B class), facing its 12 mm light slot: red for the end of a period, yellow for the shot clock, and the call colours in club play" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "D12_5x5" (layer "F.Cu") (at 76.5 150 0) (property "Reference" "D12" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "RGB LED with driver, 5050 (WS2812B class), facing its 12 mm light slot: red for the end of a period, yellow for the shot clock, and the call colours in club play" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "D13_5x5" (layer "F.Cu") (at 93.5 150 0) (property "Reference" "D13" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "RGB LED with driver, 5050 (WS2812B class), facing its 12 mm light slot: red for the end of a period, yellow for the shot clock, and the call colours in club play" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "D14_5x5" (layer "F.Cu") (at 110.5 150 0) (property "Reference" "D14" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "RGB LED with driver, 5050 (WS2812B class), facing its 12 mm light slot: red for the end of a period, yellow for the shot clock, and the call colours in club play" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J61_6.5x5.75" (layer "B.Cu") (at -113 150 0) (property "Reference" "J61" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "JST GH SM03B-GHS-TB 3-pin side-entry header, latched (5 V, GND, data in)" (at 0 3.675 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -3.25 -2.875) (end 3.25 2.875) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -3.25 -2.875) (end 3.25 2.875) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J62_6.5x5.75" (layer "B.Cu") (at 113 150 0) (property "Reference" "J62" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "JST GH SM03B-GHS-TB 3-pin side-entry header, latched (5 V, GND, data out)" (at 0 3.675 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -3.25 -2.875) (end 3.25 2.875) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -3.25 -2.875) (end 3.25 2.875) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "C61_6x6" (layer "B.Cu") (at 0 150 0) (property "Reference" "C61" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Bulk capacitor on the section's 5 V" (at 0 3.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -3 -3) (end 3 3) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -3 -3) (end 3 3) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1a1_5x5" (layer "F.Cu") (at -86.3 295 0) (property "Reference" "DS1a1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment a: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1a2_5x5" (layer "F.Cu") (at -77.5 295 0) (property "Reference" "DS1a2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment a: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1a3_5x5" (layer "F.Cu") (at -68.8 295 0) (property "Reference" "DS1a3" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment a: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1a4_5x5" (layer "F.Cu") (at -60 295 0) (property "Reference" "DS1a4" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment a: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1a5_5x5" (layer "F.Cu") (at -51.3 295 0) (property "Reference" "DS1a5" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment a: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1a6_5x5" (layer "F.Cu") (at -42.5 295 0) (property "Reference" "DS1a6" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment a: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1a7_5x5" (layer "F.Cu") (at -33.8 295 0) (property "Reference" "DS1a7" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment a: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1g1_5x5" (layer "F.Cu") (at -86.3 360 0) (property "Reference" "DS1g1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment g: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1g2_5x5" (layer "F.Cu") (at -77.5 360 0) (property "Reference" "DS1g2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment g: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1g3_5x5" (layer "F.Cu") (at -68.8 360 0) (property "Reference" "DS1g3" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment g: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1g4_5x5" (layer "F.Cu") (at -60 360 0) (property "Reference" "DS1g4" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment g: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1g5_5x5" (layer "F.Cu") (at -51.3 360 0) (property "Reference" "DS1g5" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment g: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1g6_5x5" (layer "F.Cu") (at -42.5 360 0) (property "Reference" "DS1g6" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment g: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1g7_5x5" (layer "F.Cu") (at -33.8 360 0) (property "Reference" "DS1g7" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment g: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1d1_5x5" (layer "F.Cu") (at -86.3 425 0) (property "Reference" "DS1d1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment d: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1d2_5x5" (layer "F.Cu") (at -77.5 425 0) (property "Reference" "DS1d2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment d: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1d3_5x5" (layer "F.Cu") (at -68.8 425 0) (property "Reference" "DS1d3" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment d: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1d4_5x5" (layer "F.Cu") (at -60 425 0) (property "Reference" "DS1d4" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment d: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1d5_5x5" (layer "F.Cu") (at -51.3 425 0) (property "Reference" "DS1d5" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment d: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1d6_5x5" (layer "F.Cu") (at -42.5 425 0) (property "Reference" "DS1d6" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment d: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1d7_5x5" (layer "F.Cu") (at -33.8 425 0) (property "Reference" "DS1d7" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment d: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1f1_5x5" (layer "F.Cu") (at -95 303.1 0) (property "Reference" "DS1f1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment f: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1f2_5x5" (layer "F.Cu") (at -95 311.2 0) (property "Reference" "DS1f2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment f: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1f3_5x5" (layer "F.Cu") (at -95 319.4 0) (property "Reference" "DS1f3" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment f: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1f4_5x5" (layer "F.Cu") (at -95 327.5 0) (property "Reference" "DS1f4" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment f: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1f5_5x5" (layer "F.Cu") (at -95 335.6 0) (property "Reference" "DS1f5" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment f: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1f6_5x5" (layer "F.Cu") (at -95 343.7 0) (property "Reference" "DS1f6" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment f: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1f7_5x5" (layer "F.Cu") (at -95 351.9 0) (property "Reference" "DS1f7" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment f: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1b1_5x5" (layer "F.Cu") (at -25 303.1 0) (property "Reference" "DS1b1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment b: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1b2_5x5" (layer "F.Cu") (at -25 311.2 0) (property "Reference" "DS1b2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment b: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1b3_5x5" (layer "F.Cu") (at -25 319.4 0) (property "Reference" "DS1b3" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment b: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1b4_5x5" (layer "F.Cu") (at -25 327.5 0) (property "Reference" "DS1b4" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment b: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1b5_5x5" (layer "F.Cu") (at -25 335.6 0) (property "Reference" "DS1b5" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment b: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1b6_5x5" (layer "F.Cu") (at -25 343.7 0) (property "Reference" "DS1b6" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment b: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1b7_5x5" (layer "F.Cu") (at -25 351.9 0) (property "Reference" "DS1b7" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment b: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1e1_5x5" (layer "F.Cu") (at -95 368.1 0) (property "Reference" "DS1e1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment e: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1e2_5x5" (layer "F.Cu") (at -95 376.3 0) (property "Reference" "DS1e2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment e: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1e3_5x5" (layer "F.Cu") (at -95 384.4 0) (property "Reference" "DS1e3" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment e: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1e4_5x5" (layer "F.Cu") (at -95 392.5 0) (property "Reference" "DS1e4" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment e: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1e5_5x5" (layer "F.Cu") (at -95 400.6 0) (property "Reference" "DS1e5" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment e: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1e6_5x5" (layer "F.Cu") (at -95 408.8 0) (property "Reference" "DS1e6" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment e: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1e7_5x5" (layer "F.Cu") (at -95 416.9 0) (property "Reference" "DS1e7" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment e: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1c1_5x5" (layer "F.Cu") (at -25 368.1 0) (property "Reference" "DS1c1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment c: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1c2_5x5" (layer "F.Cu") (at -25 376.3 0) (property "Reference" "DS1c2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment c: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1c3_5x5" (layer "F.Cu") (at -25 384.4 0) (property "Reference" "DS1c3" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment c: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1c4_5x5" (layer "F.Cu") (at -25 392.5 0) (property "Reference" "DS1c4" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment c: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1c5_5x5" (layer "F.Cu") (at -25 400.6 0) (property "Reference" "DS1c5" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment c: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1c6_5x5" (layer "F.Cu") (at -25 408.8 0) (property "Reference" "DS1c6" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment c: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS1c7_5x5" (layer "F.Cu") (at -25 416.9 0) (property "Reference" "DS1c7" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 1 segment c: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2a1_5x5" (layer "F.Cu") (at 33.8 295 0) (property "Reference" "DS2a1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment a: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2a2_5x5" (layer "F.Cu") (at 42.5 295 0) (property "Reference" "DS2a2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment a: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2a3_5x5" (layer "F.Cu") (at 51.3 295 0) (property "Reference" "DS2a3" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment a: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2a4_5x5" (layer "F.Cu") (at 60 295 0) (property "Reference" "DS2a4" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment a: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2a5_5x5" (layer "F.Cu") (at 68.8 295 0) (property "Reference" "DS2a5" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment a: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2a6_5x5" (layer "F.Cu") (at 77.5 295 0) (property "Reference" "DS2a6" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment a: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2a7_5x5" (layer "F.Cu") (at 86.3 295 0) (property "Reference" "DS2a7" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment a: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2g1_5x5" (layer "F.Cu") (at 33.8 360 0) (property "Reference" "DS2g1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment g: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2g2_5x5" (layer "F.Cu") (at 42.5 360 0) (property "Reference" "DS2g2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment g: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2g3_5x5" (layer "F.Cu") (at 51.3 360 0) (property "Reference" "DS2g3" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment g: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2g4_5x5" (layer "F.Cu") (at 60 360 0) (property "Reference" "DS2g4" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment g: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2g5_5x5" (layer "F.Cu") (at 68.8 360 0) (property "Reference" "DS2g5" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment g: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2g6_5x5" (layer "F.Cu") (at 77.5 360 0) (property "Reference" "DS2g6" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment g: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2g7_5x5" (layer "F.Cu") (at 86.3 360 0) (property "Reference" "DS2g7" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment g: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2d1_5x5" (layer "F.Cu") (at 33.8 425 0) (property "Reference" "DS2d1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment d: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2d2_5x5" (layer "F.Cu") (at 42.5 425 0) (property "Reference" "DS2d2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment d: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2d3_5x5" (layer "F.Cu") (at 51.3 425 0) (property "Reference" "DS2d3" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment d: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2d4_5x5" (layer "F.Cu") (at 60 425 0) (property "Reference" "DS2d4" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment d: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2d5_5x5" (layer "F.Cu") (at 68.8 425 0) (property "Reference" "DS2d5" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment d: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2d6_5x5" (layer "F.Cu") (at 77.5 425 0) (property "Reference" "DS2d6" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment d: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2d7_5x5" (layer "F.Cu") (at 86.3 425 0) (property "Reference" "DS2d7" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment d: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2f1_5x5" (layer "F.Cu") (at 25 303.1 0) (property "Reference" "DS2f1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment f: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2f2_5x5" (layer "F.Cu") (at 25 311.2 0) (property "Reference" "DS2f2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment f: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2f3_5x5" (layer "F.Cu") (at 25 319.4 0) (property "Reference" "DS2f3" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment f: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2f4_5x5" (layer "F.Cu") (at 25 327.5 0) (property "Reference" "DS2f4" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment f: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2f5_5x5" (layer "F.Cu") (at 25 335.6 0) (property "Reference" "DS2f5" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment f: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2f6_5x5" (layer "F.Cu") (at 25 343.7 0) (property "Reference" "DS2f6" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment f: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2f7_5x5" (layer "F.Cu") (at 25 351.9 0) (property "Reference" "DS2f7" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment f: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2b1_5x5" (layer "F.Cu") (at 95 303.1 0) (property "Reference" "DS2b1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment b: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2b2_5x5" (layer "F.Cu") (at 95 311.2 0) (property "Reference" "DS2b2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment b: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2b3_5x5" (layer "F.Cu") (at 95 319.4 0) (property "Reference" "DS2b3" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment b: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2b4_5x5" (layer "F.Cu") (at 95 327.5 0) (property "Reference" "DS2b4" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment b: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2b5_5x5" (layer "F.Cu") (at 95 335.6 0) (property "Reference" "DS2b5" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment b: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2b6_5x5" (layer "F.Cu") (at 95 343.7 0) (property "Reference" "DS2b6" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment b: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2b7_5x5" (layer "F.Cu") (at 95 351.9 0) (property "Reference" "DS2b7" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment b: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2e1_5x5" (layer "F.Cu") (at 25 368.1 0) (property "Reference" "DS2e1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment e: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2e2_5x5" (layer "F.Cu") (at 25 376.3 0) (property "Reference" "DS2e2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment e: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2e3_5x5" (layer "F.Cu") (at 25 384.4 0) (property "Reference" "DS2e3" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment e: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2e4_5x5" (layer "F.Cu") (at 25 392.5 0) (property "Reference" "DS2e4" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment e: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2e5_5x5" (layer "F.Cu") (at 25 400.6 0) (property "Reference" "DS2e5" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment e: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2e6_5x5" (layer "F.Cu") (at 25 408.8 0) (property "Reference" "DS2e6" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment e: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2e7_5x5" (layer "F.Cu") (at 25 416.9 0) (property "Reference" "DS2e7" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment e: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2c1_5x5" (layer "F.Cu") (at 95 368.1 0) (property "Reference" "DS2c1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment c: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2c2_5x5" (layer "F.Cu") (at 95 376.3 0) (property "Reference" "DS2c2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment c: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2c3_5x5" (layer "F.Cu") (at 95 384.4 0) (property "Reference" "DS2c3" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment c: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2c4_5x5" (layer "F.Cu") (at 95 392.5 0) (property "Reference" "DS2c4" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment c: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2c5_5x5" (layer "F.Cu") (at 95 400.6 0) (property "Reference" "DS2c5" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment c: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2c6_5x5" (layer "F.Cu") (at 95 408.8 0) (property "Reference" "DS2c6" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment c: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DS2c7_5x5" (layer "F.Cu") (at 95 416.9 0) (property "Reference" "DS2c7" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050 (WS2812B class), digit 2 segment c: the shot clock seconds, and tenths under 5 s" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DP1_5x5" (layer "F.Cu") (at 0 425 0) (property "Reference" "DP1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050, the point between the seconds and the tenths" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "DP2_5x5" (layer "F.Cu") (at 0 417 0) (property "Reference" "DP2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Red LED with driver, 5050, the point (second LED)" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J71_11.9x10" (layer "B.Cu") (at 120 420 0) (property "Reference" "J71" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Molex Micro-Fit 3.0 vertical header, 3 circuits, latched (5 V, GND, digit data)" (at 0 5.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -5.95 -5) (end 5.95 5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -5.95 -5) (end 5.95 5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "C71_20x6" (layer "B.Cu") (at 120 400 0) (property "Reference" "C71" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Bulk capacitors and a 1.5 A polyfuse on the digits' 5 V" (at 0 3.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -10 -3) (end 10 3) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -10 -3) (end 10 3) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J81_15.2x12" (layer "B.Cu") (at 364 400 0) (property "Reference" "J81" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Push-in PCB terminal, 3-pole 5.0 mm pitch (Phoenix Contact SPT 2.5/3-H-5.0 class) for the gym's shot-clock mains feed (L, N, PE), in through a gland in the box floor (rev T)" (at 0 6.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -7.6 -6) (end 7.6 6) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -7.6 -6) (end 7.6 6) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "F1A_10x5" (layer "B.Cu") (at 364 380 0) (property "Reference" "F1A" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Schurter OMT 125 class 2 A slow-blow SMD fuse and a 275 V varistor on L" (at 0 3.3 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -5 -2.5) (end 5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -5 -2.5) (end 5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "SLOT_2x100" (layer "B.Cu") (at 350 360 0) (property "Reference" "SLOT" (at 0 0 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Milled 2 mm slot and 6 mm keep-out between the mains side and the 5 V side (IEC 62368-1 reinforced, est.)" (at 0 50.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1 -50) (end 1 50) (stroke (width 0.05) (type solid)) (fill none) (layer "Dwgs.User")) (fp_rect (start -1 -50) (end 1 50) (stroke (width 0.12) (type solid)) (fill none) (layer "B.Fab")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "SLOTA_2x100" (layer "F.Cu") (at 350 360 0) (property "Reference" "SLOTA" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "The same slot, side A" (at 0 50.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -1 -50) (end 1 50) (stroke (width 0.05) (type solid)) (fill none) (layer "Dwgs.User")) (fp_rect (start -1 -50) (end 1 50) (stroke (width 0.12) (type solid)) (fill none) (layer "F.Fab")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "PS1_87x52" (layer "F.Cu") (at 305 345 0) (property "Reference" "PS1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Mean Well IRM-60-5 encapsulated PCB-mount supply, 5 V 10 A (50 W), 85–264 V in, Class II, input pins over the mains side" (at 0 26.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -43.5 -26) (end 43.5 26) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -43.5 -26) (end 43.5 26) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J82_13x10" (layer "B.Cu") (at 270 405 0) (property "Reference" "J82" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Molex Micro-Fit 3.0 vertical header, 6 circuits, latched (5 V and GND two pins each, digit data), down through the box floor to the top rail" (at 0 5.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -6.5 -5) (end 6.5 5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -6.5 -5) (end 6.5 5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J83_11.9x10" (layer "B.Cu") (at 270 330 0) (property "Reference" "J83" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Molex Micro-Fit 3.0 vertical header, 3 circuits, latched" (at 0 5.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -5.95 -5) (end 5.95 5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -5.95 -5) (end 5.95 5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "J84_11.9x10" (layer "F.Cu") (at 240 400 0) (property "Reference" "J84" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)))) (property "Value" "Molex Micro-Fit 3.0 vertical header, 3 circuits, latched" (at 0 5.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -5.95 -5) (end 5.95 5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd")) (fp_rect (start -5.95 -5) (end 5.95 5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) (footprint "C81_16x8" (layer "B.Cu") (at 300 405 0) (property "Reference" "C81" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))) (property "Value" "Bulk capacitors and a TVS on the 5 V output" (at 0 4.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08)))) (fp_rect (start -8 -4) (end 8 4) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd")) (fp_rect (start -8 -4) (end 8 4) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS")) (attr board_only exclude_from_pos_files exclude_from_bom) ) )