(kicad_pcb (version 20240108) (generator "iemi_bedsideone_board") (generator_version "1")
  (general (thickness 1.6) (legacy_teardrops no))
  (paper "A1")
  (title_block (title "BedsideOne table board rev A") (date "2026-11-04") (rev "A") (company "IEMI Labs") (comment 1 "Head board 415 x 206 in the lamp head, top board 420 x 376.8 in the hollow top, front strip and 15 deg radar tab, glow strip at the kick board; flexes up the upstand and down the side panel"))
  (layers (0 "F.Cu" signal) (1 "In1.Cu" signal) (2 "In2.Cu" signal) (31 "B.Cu" signal) (32 "B.Adhes" user "B.Adhesive") (33 "F.Adhes" user "F.Adhesive") (34 "B.Paste" user) (35 "F.Paste" user)
    (36 "B.SilkS" user "B.Silkscreen") (37 "F.SilkS" user "F.Silkscreen") (38 "B.Mask" user) (39 "F.Mask" user) (40 "Dwgs.User" user "User.Drawings")
    (41 "Cmts.User" user "User.Comments") (44 "Edge.Cuts" user) (45 "Margin" user) (46 "B.CrtYd" user "B.Courtyard") (47 "F.CrtYd" user "F.Courtyard")
    (48 "B.Fab" user) (49 "F.Fab" user))
  (setup (pad_to_mask_clearance 0))
  (net 0 "")
  (gr_poly (pts (xy -210 -10) (xy 191 -10) (xy 191 10) (xy -200 10) (xy -200 216) (xy 215 216) (xy 215 10) (xy 209 10) (xy 209 -10) (xy 210 -10) (xy 210 -360) (xy 230 -360) (xy 230 -351) (xy 470 -351) (xy 470 -381) (xy 230 -381) (xy 230 -372) (xy 210 -372) (xy 210 -386.78) (xy 40 -386.78) (xy 40 -392.78) (xy 150 -392.78) (xy 150 -437.78) (xy -137.4 -437.78) (xy -137.4 -422.78) (xy -140.4 -422.78) (xy -140.4 -426.78) (xy -160.4 -426.78) (xy -160.4 -400.78) (xy -140.4 -400.78) (xy -140.4 -404.78) (xy -137.4 -404.78) (xy -137.4 -392.78) (xy -20 -392.78) (xy -20 -386.78) (xy -210 -386.78)) (stroke (width 0.1) (type solid)) (fill none) (layer "Edge.Cuts"))
  (gr_poly (pts (xy -127 -283) (xy -103 -283) (xy -103 -307) (xy -127 -307)) (stroke (width 0.1) (type solid)) (fill none) (layer "Edge.Cuts"))
  (gr_poly (pts (xy 88 -283) (xy 112 -283) (xy 112 -307) (xy 88 -307)) (stroke (width 0.1) (type solid)) (fill none) (layer "Edge.Cuts"))
  (gr_text "up flex 18 mm wide, about 463 mm: up the upstand to the head board" (at 200 15 0) (layer "Cmts.User") (effects (font (size 1.5 1.5) (thickness 0.2))))
  (gr_text "glow tail 12 mm wide, about 523 mm: down the right side panel to the glow strip" (at 270 -350 0) (layer "Cmts.User") (effects (font (size 1.5 1.5) (thickness 0.2))))
  (gr_text "front flex: folds 90 deg up; radar tab flex: folds 15 deg" (at 80 -389.78 0) (layer "Cmts.User") (effects (font (size 1 1) (thickness 0.15))))
  (footprint "U1_18x25.5" (layer "B.Cu") (at 120 23.1)
    (property "Reference" "U1" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Espressif ESP32-S3-WROOM-1-N16R8: ESP32-S3, 16 MB flash, 8 MB PSRAM (camera frames), PCB antenna, FCC/CE certified; castellated, soldered" (at 0 13.55 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -9 -12.75) (end 9 12.75) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -9 -12.75) (end 9 12.75) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U2_3x2" (layer "B.Cu") (at 80 60)
    (property "Reference" "U2" (at 0 0 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Microchip ATECC608B, UDFN-8: signs every call" (at 0 1.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -1.5 -1) (end 1.5 1) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -1.5 -1) (end 1.5 1) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U9_2x3" (layer "B.Cu") (at 86 60)
    (property "Reference" "U9" (at 0 0 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "ID EEPROM 2 kbit (product, board version, serial, calibration)" (at 0 2.3 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -1 -1.5) (end 1 1.5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -1 -1.5) (end 1 1.5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "J2_14x15" (layer "B.Cu") (at 40 80)
    (property "Reference" "J2" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "microSD socket with a hinged, latched lid (Amphenol 101-00660 class), fitted on every board: our software starts from the card (ESP32-S3 SD bus; the loader the maker flashes reads our program from it)" (at 0 8.3 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -7 -7.5) (end 7 7.5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -7 -7.5) (end 7 7.5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U91_3x1.35" (layer "B.Cu") (at 40 89)
    (property "Reference" "U91" (at 0 0 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "microSD ESD and filter array, 6 lines (TPD6F003-class), with 22 Ω series resistors on CLK, CMD and D0–D3 and the card-detect line" (at 0 1.475 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -1.5 -0.675) (end 1.5 0.675) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -1.5 -0.675) (end 1.5 0.675) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U90_2x2" (layer "B.Cu") (at 40 71)
    (property "Reference" "U90" (at 0 0 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "microSD card power switch (TPS22917-class load switch, 3.3 V, driven by the card power-enable pin) with a 10 kΩ discharge resistor: a stuck card can be power-cycled" (at 0 1.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -1 -1) (end 1 1) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -1 -1) (end 1 1) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "MK1_4x3" (layer "B.Cu") (at 120 140)
    (property "Reference" "MK1" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Infineon IM69D130 MEMS mic, bottom port over a Ø1 hole through the board (the concentrator's hum and alarm beeps)" (at 0 2.3 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2 -1.5) (end 2 1.5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -2 -1.5) (end 2 1.5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U7_2x2" (layer "B.Cu") (at 0 110)
    (property "Reference" "U7" (at 0 0 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Level shifter for the LED data lines (3.3 to 5 V), lamp head and floor glow" (at 0 1.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -1 -1) (end 1 1) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -1 -1) (end 1 1) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U11_8x5" (layer "B.Cu") (at -50 45)
    (property "Reference" "U11" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Camera rails: 2.8 V analog, 1.3 V core LDOs and the 24 MHz MEMS oscillator for the camera chip" (at 0 3.3 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -4 -2.5) (end 4 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -4 -2.5) (end 4 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U10_8.5x8.5" (layer "F.Cu") (at -50 20)
    (property "Reference" "U10" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "OmniVision OV2640 2 MP camera chip (chip-scale package) under an M7 lens holder with a 66 × 52° lens, looking straight down at the pill box through the Ø10 window" (at 0 5.05 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -4.25 -4.25) (end 4.25 4.25) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -4.25 -4.25) (end 4.25 4.25) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "GK1_5x5" (layer "F.Cu") (at 120 140)
    (property "Reference" "GK1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "Silicone sound gasket Ø5 × 8 from the board hole to the mic port in the cover" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "Dwgs.User"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "LS1_12x12" (layer "F.Cu") (at 150 140)
    (property "Reference" "LS1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "Magnetic sounder 12 × 12 SMD over the tone holes (the soft chime)" (at 0 6.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -6 -6) (end 6 6) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -6 -6) (end 6 6) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "Q1_3x3" (layer "F.Cu") (at 150 125)
    (property "Reference" "Q1" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "Sounder driver FET" (at 0 2.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -1.5 -1.5) (end 1.5 1.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -1.5 -1.5) (end 1.5 1.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "SW1_12.8x5.8" (layer "F.Cu") (at 200 200)
    (property "Reference" "SW1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "Omron D2F-01, plunger down, pressed by the lamp cover's 1.5 mm boss when the cover is screwed on" (at 0 3.7 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -6.4 -2.9) (end 6.4 2.9) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -6.4 -2.9) (end 6.4 2.9) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "TP1_10x6" (layer "F.Cu") (at 0 60)
    (property "Reference" "TP1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "Factory pads: USB (ESP32-S3 native), serial, boot, enable, rails, current sense" (at 0 3.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -5 -3) (end 5 3) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -5 -3) (end 5 3) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "ANT_18x7" (layer "F.Cu") (at 120 13.85)
    (property "Reference" "ANT" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "Keep-out under the ESP32-S3 antenna: no copper, no parts" (at 0 4.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -9 -3.5) (end 9 3.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -9 -3.5) (end 9 3.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "J1_8x10" (layer "B.Cu") (at 170 -40)
    (property "Reference" "J1" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Molex Micro-Fit 3.0 single-row vertical header, 2 circuits, latched: 5 V and ground from the listed USB adapter's lead" (at 0 5.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -4 -5) (end 4 5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -4 -5) (end 4 5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U4_14x10" (layer "B.Cu") (at 120 -45)
    (property "Reference" "U4" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "5 V input: polyfuse, TVS, reverse block; TI BQ24074 1S charger with power path (1 A, NTC input); TI TPS63020 3.3 V buck-boost" (at 0 5.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -7 -5) (end 7 5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -7 -5) (end 7 5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "BT1_77x21" (layer "B.Cu") (at -100 -40)
    (property "Reference" "BT1" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Keystone 1042 SMT holder for one 18650 cell (Samsung INR18650-35E), back cell" (at 0 11.3 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -38.5 -10.5) (end 38.5 10.5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -38.5 -10.5) (end 38.5 10.5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "BT2_77x21" (layer "B.Cu") (at -100 -65)
    (property "Reference" "BT2" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Keystone 1042 SMT holder for one 18650 cell (Samsung INR18650-35E), front cell" (at 0 11.3 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -38.5 -10.5) (end 38.5 10.5) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -38.5 -10.5) (end 38.5 10.5) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "RT1_1.6x0.8" (layer "B.Cu") (at -100 -52.5)
    (property "Reference" "RT1" (at 0 0 0) (layer "B.Fab") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "NTC thermistor 10 k, 0603, between the two cell holders, read by the BQ24074 so charging holds outside 0–45 °C" (at 0 1.2 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -0.8 -0.4) (end 0.8 0.4) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -0.8 -0.4) (end 0.8 0.4) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U5_10x6.2" (layer "B.Cu") (at -115 -260)
    (property "Reference" "U5" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Nuvoton NAU7802 24-bit load-cell chip for the pill-box plate's 1 kg bar, with its four gauge-wire pads" (at 0 3.9 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -5 -3.1) (end 5 3.1) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -5 -3.1) (end 5 3.1) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U6_10x6.2" (layer "B.Cu") (at 100 -260)
    (property "Reference" "U6" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Nuvoton NAU7802 24-bit load-cell chip for the when-required plate's 1 kg bar, with its four gauge-wire pads" (at 0 3.9 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -5 -3.1) (end 5 3.1) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -5 -3.1) (end 5 3.1) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "PD1_10x4" (layer "B.Cu") (at -115 -274)
    (property "Reference" "PD1" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Four solder pads for the load cell's gauge wires (red, black, white, green), strain-relief slot beside them" (at 0 2.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -5 -2) (end 5 2) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -5 -2) (end 5 2) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "PD2_10x4" (layer "B.Cu") (at 100 -274)
    (property "Reference" "PD2" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Four solder pads for the load cell's gauge wires, strain-relief slot beside them" (at 0 2.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -5 -2) (end 5 2) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -5 -2) (end 5 2) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U8_14x8" (layer "B.Cu") (at -60 -360)
    (property "Reference" "U8" (at 0 0 0) (layer "B.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)))
    (property "Value" "Radar rails (TI LP87745 class PMIC), 40 MHz crystal and 2 MB QSPI flash for the radar's own program" (at 0 4.8 0) (layer "B.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -7 -4) (end 7 4) (stroke (width 0.05) (type solid)) (fill none) (layer "B.CrtYd"))
    (fp_rect (start -7 -4) (end 7 4) (stroke (width 0.12) (type solid)) (fill none) (layer "B.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "TP2_10x6" (layer "F.Cu") (at 120 -60)
    (property "Reference" "TP2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "Factory pads: 5 V in, battery, 3.3 V, charger status" (at 0 3.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -5 -3) (end 5 3) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -5 -3) (end 5 3) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U12_4.9x2.5" (layer "F.Cu") (at 100 -413.161)
    (property "Reference" "U12" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "ST VL53L1X time-of-flight distance chip at the walker window (27° cone)" (at 0 2.05 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.45 -1.25) (end 2.45 1.25) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.45 -1.25) (end 2.45 1.25) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "U3_6.5x6.5" (layer "F.Cu") (at -150.4 -413.161)
    (property "Reference" "U3" (at 0 0 0) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "TI IWRL6432AOP 60 GHz radar, antennas in package (2 TX, 3 RX), low-power tracking: the parent sitting up, at the bed edge, walking out and back, walking speed" (at 0 4.05 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -3.25 -3.25) (end 3.25 3.25) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -3.25 -3.25) (end 3.25 3.25) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "RKO_14x14" (layer "F.Cu") (at -150.4 -413.161)
    (property "Reference" "RKO" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "Keep-out in front of the radar antennas: no parts or copper pour" (at 0 7.8 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -7 -7) (end 7 7) (stroke (width 0.05) (type solid)) (fill none) (layer "Dwgs.User"))
    (fp_rect (start -7 -7) (end 7 7) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D1_5x5" (layer "F.Cu") (at -172.4 140)
    (property "Reference" "D1" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), over the thinned opal" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D2_5x5" (layer "F.Cu") (at -166 140)
    (property "Reference" "D2" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), over the thinned opal" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D3_5x5" (layer "F.Cu") (at -159.6 140)
    (property "Reference" "D3" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), over the thinned opal" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D4_5x5" (layer "F.Cu") (at -153.2 140)
    (property "Reference" "D4" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), over the thinned opal" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D5_5x5" (layer "F.Cu") (at -146.8 140)
    (property "Reference" "D5" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), over the thinned opal" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D6_5x5" (layer "F.Cu") (at -140.4 140)
    (property "Reference" "D6" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), over the thinned opal" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D7_5x5" (layer "F.Cu") (at -134 140)
    (property "Reference" "D7" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), over the thinned opal" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D8_5x5" (layer "F.Cu") (at -127.6 140)
    (property "Reference" "D8" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), over the thinned opal" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D9_5x5" (layer "F.Cu") (at 27.6 140)
    (property "Reference" "D9" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), over the thinned opal" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D10_5x5" (layer "F.Cu") (at 34 140)
    (property "Reference" "D10" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), over the thinned opal" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D11_5x5" (layer "F.Cu") (at 40.4 140)
    (property "Reference" "D11" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), over the thinned opal" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D12_5x5" (layer "F.Cu") (at 46.8 140)
    (property "Reference" "D12" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), over the thinned opal" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D13_5x5" (layer "F.Cu") (at 53.2 140)
    (property "Reference" "D13" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), over the thinned opal" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D14_5x5" (layer "F.Cu") (at 59.6 140)
    (property "Reference" "D14" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), over the thinned opal" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D15_5x5" (layer "F.Cu") (at 66 140)
    (property "Reference" "D15" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), over the thinned opal" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D16_5x5" (layer "F.Cu") (at 72.4 140)
    (property "Reference" "D16" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), over the thinned opal" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D17_5x5" (layer "F.Cu") (at 247.6 -366)
    (property "Reference" "D17" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), amber at night, behind the kick board's opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D18_5x5" (layer "F.Cu") (at 254 -366)
    (property "Reference" "D18" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), amber at night, behind the kick board's opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D19_5x5" (layer "F.Cu") (at 260.4 -366)
    (property "Reference" "D19" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), amber at night, behind the kick board's opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D20_5x5" (layer "F.Cu") (at 266.8 -366)
    (property "Reference" "D20" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), amber at night, behind the kick board's opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D21_5x5" (layer "F.Cu") (at 273.2 -366)
    (property "Reference" "D21" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), amber at night, behind the kick board's opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D22_5x5" (layer "F.Cu") (at 279.6 -366)
    (property "Reference" "D22" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), amber at night, behind the kick board's opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D23_5x5" (layer "F.Cu") (at 286 -366)
    (property "Reference" "D23" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), amber at night, behind the kick board's opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
  (footprint "D24_5x5" (layer "F.Cu") (at 292.4 -366)
    (property "Reference" "D24" (at 0 0 0) (layer "F.SilkS") (effects (font (size 0.8 0.8) (thickness 0.12))))
    (property "Value" "RGB LED with driver, 5050 (WS2812B class), amber at night, behind the kick board's opal slot" (at 0 3.3 0) (layer "F.Fab") hide (effects (font (size 0.5 0.5) (thickness 0.08))))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd"))
    (fp_rect (start -2.5 -2.5) (end 2.5 2.5) (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS"))
    (attr board_only exclude_from_pos_files exclude_from_bom)
  )
)